Valve Seat

SKU:
Z132
The valve seat is attached to the end of the valve piston within the solenoid supply valve used on the XT10, XT10I, XT15,XT15I, HCL, HCLI, DELTA, DELTAI, A2000, A2000I, TDF & TDFI instruments. 
$21.00

Viton® O-ring

SKU:
Z133
This Viton® O-ring is used within the solenoid supply valves on the XT10, XT10I, XT15, XT15I, HCL, HCLI, DELTA, DELTAI, A2000, A2000I, TDF & TDFI instruments for proper sealing and replaces the valve body seal O-ring around the inside of the valve guide tube. 
$5.00

Valve Spring

SKU:
Z135
The Valve Spring is used inside the solenoid supply valves on the XT10, XT10I, XT15, XT15I, HCL, HCLI, DELTA, DELTAI, A2000, A2000I, TDF & TDFI instruments and is inserted inside the Valve Piston w/ Viton® Seal.   Note: For XT10, XT10I, XT15 & XT15I - This spring cannot be used in valve Q5. For replacing the Q5 Valve Spring, order part X35. 
$5.00

Valve Piston w/Viton® Seat

SKU:
5678
The Valve Piston w/Viton® Seat is used inside the solenoid supply valves on the XT10, XT10I, XT15, XT15I, HCL, HCLI, DELTA, DELTAI, A2000, A2000I, TDF & TDFI instruments and is used to replace a damaged, worn or corroded component.  
DELTA: found in the DELTA13 Vent Valve Assembly and DELTA?? Water Valve Assembly.
A2000: found in the A21 Water valve Assembly (Q6) and A22 Vent Valve Assembly (Q7).
XT10: found in the X62 Solvent Drain Valve Assembly (Q1, Q2, Q3) and X63 Water Valve Assembly (Q5, Q6).
XT15: found in the X61 Vent valve Assembly (Q7), X62 Solvent Drain Valve Assembly (Q1, Q2, Q3), X63 Water Valve Assembly (Q5, Q6), and X66 Fill Valve Assembly (Q4).
HCL: found in the H4 HCL Water Supply Valve Assembly (Q2).
TDF: found in the TDF25 Supply Valve Assembly (Water, Buffer, EtOH78, EtOH95). 
 
Related Documents: 
Procedure Title Download
16 Water and Vent Valve Service View PDF
04 Water Supply Valve Maintenance (H4) View PDF
$115.00

500ml Glass Bottle Coated Clear (Bottle for RFS or Trap flask for XT10 XT10I XT15 XT15I)

SKU:
5605
A 5605 Clear Glass Bottle with protective coating is one of the bottle options that can be used with an RF1 Gas Production Module or used to collect solvent vented from the XT15 and XT10 Instruments.
This bottle provides the following features:
    - up to 500ml of space to hold material
    - a protective coating to protect against breakage
$55.00

Splat Display Assembly

SKU:
X90
The Splat Display Assembly is used in the XT10, XT15 & HCL Fat extractors and DELTA & A2000 Fiber Instruments.  Mounted on the front of the instrument, this LCD screen displays temperature, time and other functions during an extraction or digestion.
$98.00

On/Off/Heat/Rotate Power Switch

SKU:
5653
The On/Off/Heat/Rotate Power Switch is used on the following ANKOM instruments: XT10, XT10I, XT15, XT15I, HCL, HCLI, RD, RDI, TDF, TDFI, D200, D200I, DELTA, DELTAI, A200, A200I, A2000, A2000I, FLEX & FLEXI.  On the D200/D200I Daisy Incubator this switch also functions as the Heat and Rotate on/off switch.
Related Documents: 
Procedure Title Download
05 Wiring Diagram View PDF
$35.00

Relay Green 120v

SKU:
460
This relay turns the heat on and off in the 120v DELTA and A2000 Fiber instruments.
$41.00

MoistureStop Weigh Pouch (desiccant)

SKU:
X45
The Moisture Stop Weigh Pouch contains a desiccant packet which absorbs moisture within the zipper bag.  It is used when cooling and weighing filter bags to avoid unwanted absorption of moisture in the dried samples which would skew results. 
Related Documents: 
Procedure Title Download
Instruction MoistureStop Weigh Pouch Instructions View PDF
$11.00

Bag Weigh Holder

SKU:
101.2
The Bag Weigh Holder is used to hold a filter bag open for easy insertion of the sample.  This part is especially useful during the weighing process.
$14.00

Digital Level Sensor Assembly (XT15 only)

SKU:
X99
     
  
 
$878.00

Extractor Vessel Assembly (XT15, XT15I only)

SKU:
X84
Before ordering an XT15/XT15I Extractor Vessel, contact [email protected] to confirm your instrument configuration.
$2,950.00

Fat Check Sample

SKU:
X106
This Fat sample is to be used with our XT15/XT10/HCl instruments. The purpose of the check sample is both to ensure proper function of the instrument and correct procedural technique. If your results do not meet the expected range, first check your procedural steps. If the method has been followed properly, please contact ANKOM Technology at www.ankom.com/contact/analytical-services.
Related Documents: 
Procedure Title Download
CoA CoA_Fat_Check_Sample View PDF
$25.00

Fiber Optic Cable & Glass Tip for XT15/XT15I

SKU:
X57
Replacement Glass Tip and Fiber Optic Cable to XT15 / XT15I level sensor.  Refer to Service Procedure X5S011 for installation instructions. 
$573.00

Flat PTFE Washer for Solvent Filter

SKU:
198
This PTFE washer is used to seal the brass solvent filter to prevent leaks.   
  
 
$3.00

Fuse 10amp Short

SKU:
206
This 10amp fuse is used in 120v AC input to the HCl, XT10 and XT15 and in both TDF and TDFI on the DC output lines from the power supply. Used to protect against power surges.
$3.00

Fuse Short 220v

SKU:
5578
This is a replacement fuse for a 220v instrument.
$7.00

Julabo Chiller, 115v/60Hz

SKU:
TCH1

The TCH1 Julabo Chiller improves system operation and solvent recovery by maintaining optimum coolant temperature. The TCH1 chiller can be used with either the XT10 or the XT15. One Julabo Chiller can support up to two extractors at the same time.

• 0° to 40°C process temperatures.
• ±0.5°C temperature stability.

Click the link below to see the Chiller information sheet.
Related Documents: 
Procedure Title Download
Info Sheet TCH1_Julabo_F500_Chiller_Info Sheet View PDF
$5,975.00

Julabo Chiller, 230v/50Hz

SKU:
TCH2

The TCH2 Julabo Chiller improves system operation and solvent recovery by maintaining optimum coolant temperature. The TCH2 chiller can be used with either the XT10 or XT15 extractors. One Julabo Chiller can support up to two extractors at the same time.

• 0° to 40°C process temperatures.
• ±0.5°C temperature stability.

Use TCH3 if you need a 230v/60Hz product.

Click the link below to see the Chiller information sheet
Related Documents: 
Procedure Title Download
Info Sheet TCH1_Julabo_F500_Chiller_Info Sheet View PDF
$5,975.00

Julabo Chiller, 230v/60Hz

SKU:
TCH3

The TCH3 Julabo Chiller improves system operation and solvent recovery by maintaining optimum coolant temperature. The TCH3 chiller can be used with either the XT10 or XT15 extractors. One Julabo Chiller can support up to two extractors at the same time.

• 0° to 40°C process temperatures.
• ±0.5°C temperature stability.
 
Click the link below to see the Chiller information sheet
Related Documents: 
Procedure Title Download
Info Sheet TCH1_Julabo_F500_Chiller_Info Sheet View PDF
$5,975.00

O-Ring 106

SKU:
5806
This Cup Insert Top seal should be used regardless of the solvent being run in the instrument.
$5.00

O-Ring Kit (Pet Ether)

SKU:
X87
This O-Ring Kit includes an Extraction Vessel seal (part # 969.5) and a Cup Insert Top seal (part # 5806). Use this kit when running Pet Ether in your instrument.
$12.00

O-Ring Simriz 241 (High penetrating solvents)

SKU:
5663
This Extraction Vessel seal should be used when running high penetrating solvents like Diethyl Ether in your instrument.
$252.00

Piston w/ Simriz Seal

SKU:
5649
This piston is used for high penetrating solvents and is included in the X55 Kit (XT15/XT15I) and the X73 Kit (XT10/XT10I).
$154.00

Pressure Gauge

SKU:
5604
This gauge shows the amount of pressure within the Extraction Vessel during instrument operation. Operating pressure will vary depending on the solvent being used.
$28.00

Safety Valve Assembly

SKU:
X72
Replacement locking Safety Valve Assembly for XT10 / XT10I and XT15 / XT15I.  Refer to Service Procedure XTS004 for installation instructions.      
  

Related Documents: 
Procedure Title Download
04 Valve Replacement (Safety) View PDF
$515.00

Sample Cup Assembly (Wave Spring Bag Holder included)

SKU:
X86
Used within the Extraction Vessel of an XT10 and an XT15, this assembly includes a Cup Insert and a Wave Spring Bag Holder.
$441.00

Solvent Filter Element

SKU:
146.1
This metal screen filters particles and should be cleaned regularly. XT15 Service Procedure 17 provides instructions for accessing this part.
$26.00

Splat Controller (XT15, XT15I only)

SKU:
X89
This is the internal computer that controls the XT15 Fat Extractor.
$409.00

Spring for Q5 Valve

SKU:
X35
This valve spring is for the Q5 solvent valve only. This spring should not be used in any other valve.
Related Documents: 
Procedure Title Download
05 Solenoid Valves Servicing View PDF
$16.00

Thermistor Assembly (XT)

SKU:
X96
This probe is used to measure the temperature within the Extraction Vessel of an XT10 and an XT15.
$114.00

Viton O-Ring for Vessel (Use with Petroleum Ether)

SKU:
969.5
This Extraction Vessel seal should be used when running Pet Ether in your instrument.
$9.00

Water Filter Assembly (HCL & XT)

SKU:
X97
This filter is used in the water supply line.
$48.00

Wave Spring Bag Holder

SKU:
983.7
This part holds the filter bags within the Cup Insert.
$20.00

Weigh Tin Desiccator

SKU:
X49
This special tray system desiccator is used for high fat samples requiring weigh tins.
$148.00

Wire Brush with Extension

SKU:
X107
Wire brush for cleaning the bottom of the XT10/XT10I and XT15/XT15I vessel. If fat residues burn to the bottom of the vessel this tool when used with a drill will assist with cleaning.      
  
 
$52.00

XT Flow Control Assembly

SKU:
X78
The X78 Flow Control Assembly  is used to visually indicate that water is flowing through the reflux circuit during the reflux cycle. Once the solvent has reached extraction temperature, the reflux circuit will cycle on and off.  When on, a red light on the control panel will illuminate, the reflux water valve will turn on, and a float in the Flow Control Assembly will rise to a level between 2-7 (we recommend a level of 4 or more  if you are using a chiller water supply of 15C or less,  or a level of 5 or more if you are using a lab water supply of 23C or less).  When the reflux circuit is  on, the control knob can be used to adjust the flow, but it is factory set and not normally adjusted.     
  
 
$225.00

XT O-Ring Kit (High penetrating solvents)

SKU:
X95
This O-Ring Kit includes parts that do not swell when contacting high penetrating solvents.
$258.00

XT Solvent Drain Valve Assembly

SKU:
X62
This part is used for both XT15/XT15I and XT10/XT10I.
$767.00

XT Vent Valve Assembly

SKU:
X61
This part is used for XT15/XT15I only.
$384.00

XT Water Valve Assembly

SKU:
X63
This part is used for both XT10/XT10I and XT15/XT15I.
$1,020.00

XT15 Drain Manifold Assembly

SKU:
X64
This part is used only in the XT15/XT15I instrument.
$165.00

XT15 Fill Valve Assembly

SKU:
X66
This part is used for XT15/XT15I only
$320.00

XT15 Level Sensor Analog Module

SKU:
X59
This module is part of the level sensing system in the XT15.
NOTE: Instruments purchased prior to 2012 may have a digital module.
Contact ANKOM Technology at [email protected] if you need assistance to determine which module to order.
$355.00

XT15 Sight Glass Assembly

SKU:
X85
This part displays the solvent level on the XT15 and XT15I instruments.
$152.00

XT15 Valve Kit (High penetrating solvents)

SKU:
X55
This kit includes replacement pistons for the four solvent valves (Q4, Q5, Q6, and Q7).
$617.00

XT15 Vent Filter

SKU:
X83
This part is used to filter solvent vapors and should be replaced every 3 months or after 100 instrument operations. This part is only used in the XT15 and XT15I instruments.
$57.00