Resource Center

The Bag Weigh Holder is used to hold a filter bag open for easy insertion of the sample. This part is especially useful during the weighing process.

The Bag Weight Machined is used on the top of the bag suspender within the DELTA/DELTAI, A200/A200I, A2000/A2000I Fiber instruments. It is necessary to hold the trays in place, which, in turn, hold the filter bags in suspension, during the digestion...

The Internal Drain Hose Assembly with check valves delivers necessary chemicals for each assay. Included in the assembly are tubes that drain chemicals after their use.

This kit and the accompanying process guide provide the parts and the instructions to complete the Preventative Maintenance (PM) process for the DELTA or A2000 Automated Fiber Analyzers. This procedure should be completed annually for an instrument...

This relay replaces Part #: 6114 and controls power to the Ascon temperature controller, motor, and drain valve on the DELTA/DELTAI and A2000/A2000I Fiber instruments, as well as the HCl/HClI instrument.

This container can be used for storing solvents when not in use. When the instrument is properly configured, a cubitainer can also be used for automatically dispensing solvents during an assay. The CUBITAINER® is a disposable flexible package. It can...

This is the internal computer that controls the A2000 Fiber Analyzers.

The A10 Motor Assembly 220v drives the agitation system in the 220v DELTAI & A2000I.

Rinse water enters the digestion vessel through this open/close valve. Refer to Service Procedure Water and Vent Valve Service (AS016) for further information.

This corrosion resistant fitting connects to the pressure sensor.

The A32 Fiber Optic Cable and Glass Tip DELTA/A2000 is part of the analog level sensing system in the DELTA and A2000. It is used in conjunction with the ( Part #: A29 ) Level Sensor Analog to detect and regulate the fill level within the vessel...

The Pressure Sensor Cable connects the Pressure Sensor to the circuit board. This is for A2000/A2000I

The Pressure Sensor Assembly includes the A41 cable and monitors pressure within the vessel.

The Agitator with Packing Set is used in the DELTA/DELTAI, A200/A200I, A2000/A2000I Fiber instruments. This is used to replace a worn or pitted agitator and with the packing set creates a seal to keep solution from leaking from the vessel into the...

The Moisture Stop Weigh Pouch contains a desiccant packet which absorbs moisture within the zipper bag. It is used when cooling and weighing filter bags to avoid unwanted absorption of moisture in the dried samples which would skew results.

The Valve Spring is used inside the solenoid supply valves on the XT10/XT10I, XT15/XT15I, HCl/HClI, DELTA/DELTAI, A2000/A2000I, and TDF/TDFI instruments and is inserted inside the Valve Piston w/ Viton® Seal. Note: For XT10/XT10I and XT15/XT15I -...

The Fan Blade is used to cool the motor during operation in the DELTA/DELTAI, A200/A200I, A2000/A2000I Fiber instruments.

Amylase is used for liquification of starch during Neutral Detergent Fiber analysis. This A03 amylase container connects to the A2000 instrument and is used for dispensing amylase into the A2000 during the rinse cycle.

The Water Filter Assembly is found in the DELTA/DELTAI and A2000/A2000I Fiber instruments. It is necessary to filter the water before it enters the valves.

The A08 Motor Assembly 120v, drives the agitation system in the 120v DELTA & A2000.

This replacement package contains the following parts: Amylase Container Assembly ( Part #: A03 ) Water Filter Assembly ( Part #: A07 ) Temperature Probe Assembly ( Part #: A17 ) Bag Suspender w/ weight ( Part #: F11 ) Agitator w/ Packing Set ( Part...

Part #: A29 is not available for purchase on the web. For assistance, please contact ANKOM Technology .

This 15 amp fuse is used on the DELTA, A2000, and A200, Fiber instruments (120v). It helps protect the instrument from a possible power surge.