Instruments
Product Categories
Resources
Part #
Automated Saponification to Isolation The ANKOM FLEX Analyte Extractor's innovative design and automated technology supports multiple analysis configurations and preparation: Vitamin & Cholesterol methods (based on AOAC 2011.07, EN-12823-1, EN-12822...
Part #
Automated Dietary Fiber Analysis Automates AOAC 985.29, 991.43, and 2001.03 (AACC 32-07.01), and Upgrade Available for AOAC 2009.01, 2011.25, 2017.16 and 2022.01 The ANKOM TDF Dietary Fiber Analyzer creates a new standard used for nutritional...
Part #
Automated Crude & Detergent Fiber Analysis The ANKOM DELTA Fiber Analyzer automates fiber determinations at the highest level. Capable of Acid Detergent, Neutral Detergent, and Crude Fiber analysis (AOCS Ba 6a-05), the ANKOM DELTA includes an...
Part #
Semi-Automated Crude & Detergent Fiber Performs AOCS Ba 6a-05 Crude Fiber, Acid Detergent Fiber, and Neutral Detergent Fiber analyses for all feeds and forages. The ANKOM 200 Fiber Analyzer has been subjected to rigorous testing over a broad range of...
Part #
Automated Crude Fat Extraction Official Crude Fat Extraction Method AOCS Am 5-04 The ANKOM XT15 Extractor provides a solution for efficient and economical solvent extraction in fat/oil analysis. It is an automated instrument for Soxhlet type...
Part #
Automated Total Fat Extraction The ANKOM HCl Hydrolysis System provides an easy method for performing the hydrolysis step in total fat/oil analysis. Filter Bag Technology prevents sample transfer errors and allows for batch hydrolysis of up to 15...
Part #
The ANKOM RD Dryer 120v 50/60 HZ is designed to dry samples and resist corrosion. The following two filters can be used with the RD Dryer depending on your application: 1) The RD1 Dryer Activated Carbon Filter is used when drying filter bags before...
Part #
Reliable In-Vitro Incubation The DAISY II Incubator has a demonstrated history of rigorous testing over a broad range of sample types. Labs around the world have achieved results in In Vitro True Digestibility, Apparent Digestibility, Rate studies...
Part #
Wireless Gas Production Measurement For purchase, please contact [email protected]. The ANKOM RF Gas Production System provides an easy-to-use method for monitoring and measuring gas production. Samples and microbes (or other fermentation sources) are...
Part #
For purchase, please contact [email protected]. RF1X Gas Production Modules can be added to an ANKOM RF Gas Production System (Base Kit). A total of 50 modules can be connected to a GEN 3 RFS system. Please specify a bottle type. NOTE: Standard RF1X...
The ANKOM 2000 and 2000I Fiber Analyzers have been discontinued. The replacement products are the DELTA and DELTAI. ANKOM will continue to supply service and parts for the 2000 and 2000I Fiber Analyzers.
Part #
The ANKOM XT10 and XT10I Fat Extractors have been discontinued. The replacement products are the XT15 and XT15I . ANKOM will continue to supply service and parts for the XT10 and XT10I Fat Extractors.
Part #
The F14 A200/A200i PM Kit provides all the necessary parts to perform routine annual preventative maintenance for an ANKOM A200/A200i Fiber Analyzer. This includes a number of wear components related to the agitation, motor and bag suspender. The kit...
Part #
This part holds the filter bags within the Cup Insert of your XT10/XT10I and XT15/XT15I.
Part #
This replacement rear clamp bar, position A is used at the top of the IDF bag position to seal the upper part of the IDF or Flow-thru Filter Bag.
Part #
This replacement rear clamp bar, position C is used at the top of the SDF bag position to seal the upper part of the SDF Bag.
Part #
For use in the ANKOM FLEX Analyte Extractor. Precision ground glass vessel; used in the digestion step of the analysis. A Digestion Vessel (part # 9362) combined with a FLEX54 form a complete Digestion Vessel Assembly.
Part #
At various times during assays involving ANKOM instruments, you will need to seal the ANKOM Filter Bags. The HS Heat Sealer (120v 50/60HZ) is used for sealing ANKOM Filter Bags. The sealer dimensions are: 13.5"L x 4"W x 8"H
Part #
Replacement cover for the 120v and 220v Heat Sealers (Part #: HS , HSi ). This is applied over the heating element and held in place with clamp strips. For an installation diagram, refer to the Heat Sealer Operation Manual.
Part #
Replacement Heating element for the 120v and 220v Heat Sealers (Part #: HS , HSi ). For an installation diagram, refer to the Heat Sealer Operation Manual.
Part #
Replacement Insulator Strip on the 120v and 220v Heat Sealers (Part #:: HS , HSi ). This is adhesive-backed and positioned beneath the heating element. For an installation diagram, refer to the Heat Sealer Operation Manual.
Part #
Replacement Silicone Rubber Gasket for upper pressure bar (in handle) of the 120v and 220v Heat Sealers (Part #: HS , HSi ). For an installation diagram, refer to the Heat Sealer Operation Manual.
Part #
At various times during assays involving ANKOM instruments, you will need to seal the ANKOM Filter Bags. The HSi Heat Sealer (220v 50/60HZ) is used for sealing ANKOM Filter Bags. Please specify the country where the heat sealer will be used so that...
Part #
This gauge shows the amount of pressure within the XT10/XT10I and XT15/XT15I Extraction Vessel during instrument operation. Operating pressure will vary depending on the solvent being used.
Part #
A 5605 Clear Glass Bottle with protective coating is one of the bottle options that can be used with an RF Module or used to collect solvent vented from the XT15 and XT10 Instruments. It is also be used for the solvent reservoirs in the FLEX...
Part #
This piston is used for high-penetrating solvents and is included in the X55 Kit (XT15/XT15I) and the X73 Kit (XT10/XT10I).
Part #
The On/Off/Heat/Rotate Power Switch is used on the following ANKOM instruments: XT10/XT10I, XT15/XT15I, HCl/HClI, RD/RDI, TDF/TDFI, D200/D200I, DELTA/DELTAI, A200/A200I, A2000/A2000I, FLEX/FLEXI. On the D200/D200I Daisy Incubator, this switch also...
Part #
This Extraction Vessel seal should be used when running high penetrating solvents like Diethyl Ether in your XT10/XT10I and XT15/XT15I.
Part #
This cup insert top seal should be used regardless of the solvent being run in the XT10/XT10I and XT15/XT15I instruments.
Part #
This relay replaces Part #: 6114 and controls power to the Ascon temperature controller, motor, and drain valve on the DELTA/DELTAI and A2000/A2000I Fiber instruments, as well as the HCl/HClI instrument.
Part #
This container can be used for storing solvents when not in use. When the instrument is properly configured, a cubitainer can also be used for automatically dispensing solvents during an assay. The CUBITAINER® is a disposable flexible package. It can...
Part #
The Vessel O-Ring is used in DELTA/DELTAI and A2000/A2000I vessel lids to seal the vessel during digestion.
Part #
The Timing Belt drives the agitator in the DELTA/DELTAI and A2000/A2000I Fiber instruments.
Part #
The Glass Tip with O-ring is a part of the analog level sensing system in the DELTA/DELTAI, A2000/A2000I Fiber instruments. Found in the Fiber Optic Cable & Glass Tip assembly ( Part #: A32 ), it is used to detect and regulate the fill level within...
Part #
The RF Gen 2 Circuit Board contains the electronics used for communication with all RF1 / RF5 modules. For installation instructions, see RF Service Procedure Chip and Board Replacement (RFS013). OBSOLETE - NO LONGER AVAILABLE.
Part #
ANKOM provides many different bottles that can be connected to an RF Module within the RF Gas Production System. The 7056 bottle provides the following features: up to 250ml of space to hold analysis material a protective coating to protect against...
Part #
ANKOM provides many different bottles that can be connected to an RF Module within the RF Gas Production System. The RF59 bottle provides the following features: up to 1000ml of space to hold analysis material a protective coating to protect against...
Part #
The Module Cap is the red plastic part on the top of the RF1 Gas Production Module. The cap covers the electronics in the RF1 and the electronics in the RF5 Reference Module Zero.
Part #
ANKOM provides many different bottles that can be connected to an RF Module within the RF Gas Production System. The RF56 bottle provides the following features: up to 100ml of space to hold analysis material a protective coating to protect against...
Part #
ANKOM provides many different bottles that can be connected to an RF Module within the RF Gas Production System. The RF36 bottle provides the following features: up to 100ml of space to hold analysis material a protective coating to protect against...
Part #
LIMITED STOCK AVAILABLE. ANKOM provides many different bottles that can be connected to an RF1 Gas Production Module within the RF Gas Production System. The 7127 bottle provides the following features: - up to 250ml of space to hold analysis...
Part #
LIMITED STOCK AVAILABLE. ANKOM provides many different bottles that can be connected to an RF1 Gas Production Module within the RF Gas Production System. The 7128 bottle provides the following features: - up to 500ml of space to hold analysis...
Part #
ANKOM provides many different bottles that can be connected to an RF Module within the RF Gas Production System. The RF37 bottle provides the following features: up to 250ml of space to hold analysis material a protective coating to protect against...
Part #
ANKOM provides many different bottles that can be connected to an RF Module within the RF Gas Production System. The RF38 bottle provides the following features: up to 500ml of space to hold analysis material a protective coating to protect against...
Part #
ANKOM provides many different bottles that can be connected to an RF Module within the RF Gas Production System. The RF39 bottle provides the following features: up to 1000ml of space to hold analysis material a protective coating to protect against...