Resource Center

The Gas Production Module Zero is used to monitor and record atmospheric pressure. This module communicates with the GPS software through the base coordinator. The zero module is only available for Generation 3 RF systems (RFS#>1000).

This corrosion-resistant PEEK valve body and stainless piston is the mechanical component of the Buffer supply valve as of November 2022. It is used as a replacement component for the Water, Buffer, EtOH78, and EtOH95 supply valves. It includes the...

The pneumatically operated Pinch Valve-IDF, SDF regulates the flow of fluids to the IDF and SDF positions. Refer to Service Procedure Pinch Valve Replacement (Output) (TS008) for installation instructions.

The pneumatically operated Pinch Valve-Waste regulates the flow of fluids to the Waste tube during line charges, flushing, and diagnostic operations. Refer to Service Procedure Pinch Valve Replacement (Output) (TS008) for installation instructions.

The fluid supply distribution manifold directs input fluids to the six IDF/SDF stations. To replace the supply manifold in your instrument, follow TDF Service Procedure Supply Manifold Replacement (TS029).

The Mixing Pad Assembly may require replacement if bent or if the pad has become loose. Refer to TDF Service Procedure Mixing Pad Adjustment (TS010) to ensure proper alignment.

The nitrogen check valve prevents fluid back-up from the 12 IDF/SDF delivery lines into the pneumatic lines.

This is an enzyme container used for supplying Amylase to the instrument.

This is an enzyme container used for supplying Protease to the instrument.

This is an enzyme container used for supplying Amyloglucosidase (AMG) to the instrument.

This relay turns the heat source on and off.

This is a chemical container used for supplying HCl to the instrument.

This is a chemical container used for supplying Buffer to the instrument.

This is a chemical container used for supplying Deionized Water to the instrument.

This is a chemical container used for supplying 78% EtOH to the instrument.

This is a chemical container used for supplying 95% EtOH to the instrument.

The Spray Tip provides distributed flow of fluid to the IDF and SDF bags and ensures proper spray rinsing of the bags. Sold in pack of 6.

Before the final weighing step in a Dietary Fiber analysis, the bags must be dried. The TDF50 stainless steel Bag Drying Rack has twelve positions for holding a full set of IDF/SDF bags when drying them in an oven.

The last step in the Dietary Fiber extraction process is to rinse the samples with acetone. That process is not done on the ANKOM TDF instrument. The TDF51 Bag Rinse Stand is used to hold the Filter Bags during an Acetone Rinse.

The largest contributor to poor TDF results is the effect of static electricity on the weighing process. The TDF52 Bag Weigh Holder is used during the weighing process to eliminate static electricity while the bag is being weighed.

The Helical Coupler is used on the DELTA/DELTAI, A200/A200I, A2000/A2000I Fiber instruments. It couples the agitator shaft with the motor to provide sample agitation within the vessel. For the A200/A200I instruments, refer to Service Procedure...

The Safety Cover with Handle is used to prevent incidental splashing of fluids and assists with preventing drafts during bag heating.

This container is used with the AOAC 2009.01/2011.25 methods.

This container is used with the AOAC 2009.01/2011.25 methods.

This container is used with the AOAC 2009.01/2011.25 methods.

The Mixer Piston Assembly is a pneumatic mixer which operates the paddle bar, ensuring good sample agitation during digestion.

This kit includes six replacement tubes for the peristaltic pump. Refer to TDF Service Procedure Tube Replacement (Silicone Pump Tubes) (TS003) for installation instructions.

The Vacuum Sensor Assembly monitors pressures on the supply lines and is used to identify empty containers, plugged fluid lines, or damage to a supply line. For replacement instructions, refer to Service Procedure Vacuum Sensor Installation (TS013).

The Flush Tubing Assembly used primarily for maintenance flushing of the fluid lines which allows the user to bypass fluid containers and connect to a single supply container.

Replacement tube set for all seven pinch valves [Enzymes, IDF inlet(2), SDF Inlet(2) and Waste(2)]. Refer to Service Procedure Tube Replacement (Pinch Valves) (TS005) for installation instructions.

This clamp bar is used in the IDF part of the instrument to close the top of the Filter Bag.

The Agitator Apron is used in the DELTA/DELTAI, A200/A200I, A2000/A2000I Fiber instruments. It serves to funnel fluid away from the motor and into the maintenance alert assembly.

This clamp bar is used in the IDF part of the instrument to close the Filter Bag just above the filter.

This clamp bar is used in the SDF part of the instrument to close the top of the Filter Bag.

This clamp bar is used in the SDF part of the instrument to close the Filter Bag just above the filter.

Replacement silicone tubing (uncut) for all 3/16" OD tubing. Refer to TDF Service Procedure Tube Replacement (Delivery) (TS006) for installation instructions.

Replacement silicone supply line tubing (uncut) for 1/4" OD silicone tubing. Refer to TDF Service Procedure Tube Replacement (Supply Line) (TS007) for installation instructions.

This replacement kit includes a Fill Nozzle, retaining ring, and a spring. For replacement instructions, refer to Service Procedure Fill Nozzle Installation (TS014).

The Bag Suspender Weight is used on the top of the bag suspender within the DELTA/DELTAI, A200/A200I, A2000/A2000I Fiber instruments. It is necessary to hold the trays in place, which, in turn, hold the filter bags in suspension, during the digestion...

This thermistor is used to measure the temperature within the RD/RDI Dryers drying chamber.

The RF16 Rechargeable Battery Packs are used to provide power to the RF1 & RF5 Gas Production Module electronics. Use an RF25 10 Station Charger to recharge your batteries.

The RF22 Vent Valve Cleaning Kit is used to clean the vent valve on a Gas Production Module (RF). For cleaning instructions, see RF Service Procedure Vent Valve Cleaning (RFS006).